Connecting An A/V Receiver - Toshiba TZ50V61 Owner's Manual

Connecting an A/V receiver
If you use a system that delivers Dolby Pro Logic* surround sound,
you will probably want to use the TV speakers as center channel
speakers.
A center channel speaker adds to the realism of a surround sound
system such as Dolby Pro Logic.
You will need:
• one pair of audio cables
• one video cable
• one audio cable for audio center channel
From
Antenna
To NV receiver
I
! I
Video 33/ Center
out in out
Caution:
Make sum the 73/isturned off before
connecting o r disconnecting an audiocableto
the Audio Center Channel I N jack.
Thespeaker may be damaged.
Connection example of Dolby Pro Logic surround system
Audio Video
VCR LDP/DVD
Note:
Refer to the instructionsfurnishedwith the
connected A /V receiverfor detailedsurround
system.
Whenthe Audio Center Channel O N/OFF
switch is in the "ON" position,the 7V
speakerswillfunctiononlyas the center
channelspeakers.
Adjust the volumefor center channel
speakers with the center levelcontrol on the
A/V receiver.
ff youusethe 73/speakers as normal
speakers, s et the Audio Center Channel
ON/OFFswitch to the "OFF" position.
* "Dolby P ro Logic"is a trademark of Dolby
LaboratoriesLicensingCorporation.
AN receiver
TV
Surround 6 Surround
speaker L speaker R
10