Toshiba TZ50V61 Owner's Manual page 20

-+.
B BLUE
RUSH ENTER
TO SELECT COLOR
OTHER PLACE PUSH_E.XIT _Q'_I
If you see separate colored lines, you have to adjust the
convergence.
4. Press ENTER to highlight RED or BLUE.
.eu m "_'--
PUSH ENTER
TO SELECT COLOR
PUSH EXIT
TOSELECT ROSmO_. _t
I]F_BLUE
PUSH ENTER
TO SELECT COLOR
PUSH EXIT _
TOSELECT ROSIT2__
5. Press • (up), • (down), 'd (left), or • (right) to converge the red
or blue line into the green line. When color convergence is
correctly adjusted, you will see two single white lines.
6. Press EXIT to display the circumference CONVERGENCE
menu.
7. Press the corresponding Number button (1-9) to select the place
you want to adjust.
• q-
PUSH 1-S
• -4-
I_P:_BLUE
PUSH ENTER
TO SELECT COLOR
PUSH EXIT <m_
• TO SELECT POSITION Ri_
8. Press ENTER to highlight RED or BLUE.
9. Press ••'_ • to converge the red or blue line into the green line.
Repeat steps 8 and 9 until you see two single white lines.
10. Press EXIT once to select any other place you want to adjust,
then repeat steps 7 through 9.
11. Press EXIT twice to close the CONVERGENCE menu.
EO