Connecting A Dvd Player Or Satellite Receiver And A Vcr; Black; E) 51Hc85, 57Hc85, 65Hc85 - Toshiba TheaterWide 51HC85 Owner's Manual

Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite and VCR.
You will need:
• one (or two, if satellite receiver is used) coaxial cable
• one set of standard A/V cables (between the monitor and VCR)
• one S-video cable (between the monitor and DVD player/satellite
receiver)
• one pair of standard audio cables (between the monitor and DVD
player/satellite receiver)
Stereo VCR
IN from ANT OUT to TV
CH 3
CH 4
From
Antenna
Monitor
OUT 1
OUT 2
IR
From
Satellite
Dish
IN from ANT
#01E_08-17_51HC85 11

Black

(E) 51HC85, 57HC85, 65HC85

IN
OUT
L R
VIDEO
AUDIO
DVD player
AUDIO
OUT
L
R
S-VIDEO VIDEO
OUT OUT
Satellite receiver
AUDIO
OUT
L
R
S-VIDEO VIDEO
OUT OUT
Note:
For the highest possible picture quality from a
DVD player or satellite receiver without
component video or HDMI, use an S-video
cable. (If your DVD player has component
video, see page 12. If your DVD player or
satellite receiver has HDMI or DVI, see page
15.)
Do not connect both an S-video cable and a
standard video cable between the monitor
and DVD player/satellite receiver at the same
time or the picture performance will be
unacceptable.
Do not connect the DVD player/satellite
receiver and VCR to the same set of Video
inputs on the monitor. (See the illustrations,
which show the DVD player/satellite receiver
connected to Video-1 on the monitor, and the
VCR connected to Video-2 on the monitor.)
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under Copyright
Law of the United States and other
countries, and may subject you to civil
and criminal liability.
05.4.28, 6:16 PM
11