Connecting A Dvd Player Or Satdlite Receiver And Avcr - Toshiba DLP 46HM84 Owner's Manual

A
Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, and TV
programs, and record one TV channel while watching another
channel.
Ybu will need:
• two (or three, if satellite receiver is used) coaxial cables
• one set of standard A/V cables (between the TV and VCR) (plus
one additional set of standard A/V cables if satellite receiver is
used)
• one S-video cable (between the TV and DVD player/satellite
receiver)
• one pair of standard audio cables (between the TV and DVD
player/satellite receiver)
Stereo VCR _:_
Antenna TV /<_
DVD Player
II
I
I
_ _'qb,_ % _ Satellite Receiver
Fr° °W 1
Satellite [ J
Dish
Note:
For the highest possible picture quality from a
DVD player or satellite r_ceiver without
component video or HDM!, use an Swideo
cable. (If your DVD player has component
video, see page 12. ff your DVD player or
satellite receiver has HDM! or DVI, see page
15.)
Do not connect both an S-video cable and a
standard video cable between the TV and
DVD player/satellite receiver at the same time
or the picture performance will be
unacceptable.
Do not connect the DVD player/satellite
r_ceiver and VCR to the same set of Video
input on the TV (See the illustrations, which
show the DVD player/satellite r_ceiver
connected to Video- 1 on the TV, and the VCR
connected to Video-2 on the TV)
The unauthorizedrecording, use,
distribution, or revision of television
programs,videotapes, DVDs,and other
materialsis prohibited under the
Copyright Lawsof the United States and
other countries, and may subject you to
civil and criminal liability.
#01E08-16 46,52,62HM84 11
Black
(E) 46HM84, 52HM84, 62HM84
5/31/04, 12:20 PM
11
[