Unblocking Programs Temporarily; Blocking Channels - Toshiba TZ50V61 Owner's Manual

Unblocking programs temporarily
1. If you try to watch aTV program that exceeds the rating limits
you set, the TV will enter into the program block mode.
TH I S PROGRAM HAS
BEEN BLOCKED_
TV-PG L V
EXCEEDS SET LIMIT8
PUSH MUTE TO ENTER PIN
4
2. If you want to watch the blocked program temporarily, press
MUTE.
3. Press the Number button (0-9) to enter the 4-digit code you have
stored.
BLOCK I NG ACT I VE
PIN CODE ....
TEMPORARY
UN-BLOCK
4. Press E_WER.
If the number is correct, the block mode will be released and the
normal picture will appear.
All blocking is disabled until the TV is turned off.
It will be enabled when the power is reapplied.
If a wrong pin code is entered, the message appears.
Enter the correct code again.
Blocking Channels
With the BLOCK CHANNEL feature, you can block specific
channels. The TV will not be able to tune these channels with the
Channel • • buttons or Channel Number buttons, unless you clear
the setting.
This TV has 8 memory spaces total, 4 for TV mode and 4 for CABLE
mode.
To block channels:
1. Press _ or • to display the BLOCK CHANNEL menu.
SET/CLEAR will be highlighted.
2. Press _ or • to highlight Set.
IV-CHIP
V-CHIP menu
IIV_H I P
ENABLE BLOCK I NQ
SET RATING
BLOCKING OPTION
To select each item:
Press • or •.
LOCKED 0 0 0 0
CH 0 0 0 0
TV
CABLE _--_-_1_t
3O