Setting the clock
To set the clock:
1. Press MENU, and then press • or _" until the SET UP menu
appears.
2. Press • or • to highlight CLOCK SET.
3. After the number position starts to blink, press the Number
buttons (0-9) to enter the correct time. The clock operates on a
24-hour cyde only.
4. Press ENTER to start the clock.
@@@@@@
SET
UP
CABLE
TV/CABLE
CH
PROGRAM
•
ADD/ERASE
ADD
_IOK
CONNECT
GUIDE
The_terLink
To display the time on-screen:
Press RECALL.
Note :
ff the TV'spower source Jsinterrupted [ff_e
power cord is unplugged or a power faffure
occurs), the cluck must be reset
MENU
ENTER
&V_
•
RECALL
61