Toshiba 65HX83 Owner's Manual page 29

Adding and erasing channels manually
After you have programmed the channels automatically, you can
manually add or erase specific channels in the channel memory.
To add or erase channels:
l. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press • or _ until the SET UP menu
appears.
5. Press • or • to highlight ADD/ERASE.
_SET OP
LANGUAGE ENGLISH
CLOCK SET
ANTI/2 ANTI
TV/CABLE CABLE
TheaterLEnk •
,!
,!
4. Press • or Ib-to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
Setting up the TheaterLink on-screen device
control feature
The TheaterLink feature enables you m control many brands of
infrared remote-controlled A/V devices through your TV using an
on-screen control bar and the TV's remote control.
To set up the TheaterLink on-screen device control feature:
1. Make sure you have properly connected the TheaterLink cable to
your remote-controlled device(s). See page 15 for details.
2. Press MENU, and then press • or Ib-until the SET UP menu
appears.
3. Press • or • to highlight TheaterLink, and then press • or _ to
enter the TheaterLink setup mode.
SET UP
LANGUAGE ENGLISH
CLOCK SET
ANT1/2 ANTI
TV/CABLE CABLE
_:START
{contleued on next page)
MENU
TV front panel
Note:
• Although the TbeaterLinkon screen dev/ce
eorltfz)lfeatuf_ includes codesfor many
devices,/t may not/nclude codes for some
of all of the features on certain devicesyou
wish to eofltf_2[
ff you are unable to program
the TbeateHJekfeature to operate your
device of some of the features on that
device, use the device'sremote eontf_)]of
the eoRtfz)ls o,q the device
• Because of variationsin recorded media,
some DVD programs may not play whet7
you use the PLAY /eonin the TheaterL/nk
on screen cof?tfz)l b ar ff th/s happens, select
the STOPieofl and press ENTER on the
remote control, and then select the PLAY
icon and press ENTER ff the DVD pfz)gram
sW does not play, use the DVD contrel
buttons on the TV2 remote eontfz)/[see
"Pregrammieg the remote control" on page
20) or use the DVD player's control buttons
of remote contfz)Z
29