Manually Adjusting The Color Convergence - Toshiba 65HX83 Owner's Manual

Manually adjusting the color convergence
To check and adjust the color convergence manually:
1. Press MENU, and then press • or • until the PICTURE menu
appears.
2. Press • or • to highlight CONVER(.;ENCE (illustrated
below left).
3. Press • or • to display the Center Convergence menu (illustrated
below right).
P_CTUR£ ANT£NNA
_ODE SPORTS .__
........... ii
CableC_ear DNR OFF
SVM HIGH _ BLUE
COLOR :TO ADJUST
TEMP£RATURE COOL i! ENTER :TO SELECT COLOR
r,
.
5.
If you see separate red, blue, or green crossed lines (or red or blue
shadows next to white lines), you need to adjust the convergence.
Press ENTER to highlight RED or BLUE, depending on which
color needs adjusting. If both red and blue need adjusting, you
will need to perform steps 4 and 5 twice.
Press • (up), • (down), • (left), or • (right) on the remote
control to converge the red or blue line into the green line, which
will turn completely white when correctly adjusted. When color
convergence is correctly adjusted, you will see two single crossed
white lines.
6. Press EXIT to display the Circumference Convergence me,re.
7. Press the corresponding Number button (1-4 and 6-9) to select
the area you want to adjust.
Number
MENU
ENTER
AV.ql I,,-
EXIT
-I-
8. Press ENTER to highlight RED or BLUE, depending on which
color needs adjusting. If both red and blue need adjusting, you
will need to perform steps 8 and 9 twice for the selected area.
-4-
RED
:TO ADJUST
ENTER :TO SELECT COLOR
EXI_ :_O S£L£C_ £OSIT_QN
9. Press ••• • to converge the red or blue line into the green line,
which will turn completely white when correctly adjusted. Repeat
steps 8 and 9 until you see two single crossed white lines.
10. Press EXIT once to select another area to adjust, and then repeat
steps 7-9.
11. Press EXIT two times to close the Convergence menu.