Connecting Devices To The Theaterlink Ir Pass-Through) Out Jack - Toshiba 65HX83 Owner's Manual

Connecting devices to the TheaterLink
TM
([IR pass-through} OUT jack
The TheaterLink 1R (infrared) pass-through feature allows yon to
remotely operate (through the TV) many infrared remote-controlled
devices (such as a Toshiba VCR or DVD player) enclosed within
an entertainment center or similar cabinet. Without the TheaterLink
connection, the device typically would need to be visible to operate it
remotely.
To connect, align the TheaterLink cable's infrared "eye" with the
device's remote sensor and attach it using double-sided mounting
tape. Plug the other end of the TheatcrLink cable into the TV's
TheaterLink OUT jack. You can connect up to two devices with the
TheaterLink cable included in the TV's original packaging.
You carl use the TV's remote control (programmed to operate
the device; see pages 18-24) or the device's remote control.
Repeatedly press MODE on the remote control to select the correct
mode for your device. Point the remote control at the front of the TV
and press the button for the desired function. The signal passes from
the remote control through the TV to the device via the TheaterLink
cable.
You will need:
• oneTheaterLink cable (included)
• double-sided mounting tape
Front of infrared remote-controlled device
(such as a Toshiba VCR or DVD player)
Po/otthe TVremote eorltm/ agthe front of the
TVto operate both the 7V aod the remote
controlled devices (Youalso can po/ot the
device'srernote control agthe TVto operate
the device,btlgyod also wff/need to use the
TV'sremote control to operate the TV_ )
TheaterLink cable's
infrared "eye" facing
device's remote
sensor
On-screen device control
Foradditional e orltr_l o pOons foryour
hometheater system, s etup the
TheaterLiok oo-screeo deviceeorltf_l
feature asdescribed oo pages29 34
You carl use this featur_ to cootfb/ marly
infraradremotecontrolled devices using
the TV'son screen cont_ul _cons
15