Matrix Seq - EverFocus PARAGON264x4--32CH Series Instruction Manual

4.9.4 Matrix Seq.

Figure 4-35 Display Menu – Matrix Seq.
Matrix: Select the matrix number to setup sequence.
Sequence: Select "On" to enable sequence function on the selected matrix monitor. Select "Off" to disable
sequence function on the selected matrix monitor.
Camera: If sequence function is disabled, select which camera to be appeared on the matrix monitor.
Step: Sequence order. For reference.
Camera: Select which camera appears in the current step.
Dwell (sec): Set the dwell time for each step. Sequence dwell time can be set from 0 to 99 seconds.
Sequence repeats continuously from steps 1 through 16 until interrupted.
88