Avoid Service Checklist - Tappan TEF324WHSA Owner's Manual

Millennia, orcelain enamel or continuous cleaning oven
Table of Contents

Advertisement

Avoid Service Checklist
Before you call for service, review this list. It may save you time and expense.
The list includes common occurrences that are not the result of defective
workmanship or materials in this appliance.
OCCURRENCE
Range is not level.
POSSIBLE
CAUSFJSOLUTION
Poor installation. Place oven rack in center of oven. Placea level on the oven
rack. Adjust leveling legs at base of range until the oven rack is level.
Be sure floor is level and is strong and stable enough
to adequately
support
range.
If floor is sagging or sloping, contact a carpenter to correct the situation.
Kitchen cabinet alignment
may make range appear unlevel. Be sure cabinets
are square
and have sufficient room for range clearance.
Cannot
move
appliance
easily.
Appliance
must
be
accessible
for
service.
Cabinets not square or are built in too tightly. Contact builder or installer to
make appliance accessible.
Carpet interferes with range. Provide sufficient space so range can be lifted
over carpet.
Surface
element
too
hot or not hot
Incorrect control setting. Make sure the correct control is on for the surface
enough,
element
to be used.
Lightweight
or warped pans used. Use only flat, evenly balanced, medium or
heavyweight
cookware.
Flat pans heat better than warped
pans. Cookware
materials
and weight
of the material
affect
heating.
Heavy- and medium-
weight
pans heat evenly. Because lightweight
pans heat unevenly, foods may
burn easily.
Surface element does not heat.
No power to the appliance. Check steps under 'Entire Appliance Does Not
Operate" in this Avoid Service Checklist.
Incorrect control setting. Make sure the correct control is on for the surface
element to be used.
Element not making contact in block. Follow instructions
under "Surface
Elements and Drip Bowls' in the General Cleaning section.
Entire appliance does not operate.
Make sure cord/plug is plugged tightly into outlet.
Service wiring is not complete. Contact your dealer, installing agent or
authorized servicer.
Power outage. Check house lights to be sure. Call your local electric company
for service.
Cooktop
and/or
oven
light
(some
Replace or tighten bulb. See Changing
Cooktop
and/or
Oven Lights (some
models)
does not work.
models)
in this Owner's Guide for instructions.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents