Sony Cyber-shot DSC-H5 User's Manual / Troubleshooting page 36

|
• You may not be able to change tile aperture value and shuuer speed combination depending on your
shooting siluations.
• When tile flash mode selling is changed, Program Shift is canceled.
• Selling lhe mode dial lit olher lhan P or turning off the power cancels Program Shill.
You catt adjust the shutter speed manually.
@ Select a shutter speed using the jog dial (page 32).
You can select a shutter speed from 1/1000 to 30 seconds.
@ Shoot the image.
• Slmttcr speeds of one second or hmger are indicated by ['], lor example, 1".
• When you set the shutter speed slower, using a tripod is recommended lit prevent tile effects of vibration.
• If you select slow shuuer speeds, il takes time to process file data.
• If you select certain shutter speeds I_,the NR slow sbuuer ftlnction activales automalically to rcdtlce the
picture noise and "NR" appears.
* When [lSOI is [Auto], [801 to [2001:1/6 second or slower
When [ISOI is [41X) I to [ I(ttX)I: 1125 second or slower
• If lhe propel exposure is nol oblained after making file seuings, lhe setting value indicators on the screen
flash when the shutler buuon is pressed hall\ray down. You call sbool ill lhis condilion, bul we
rcconm/end that you adjust the flashing values again.
• The flash is set to _ (Flash lorced on/or @/Flash forced oil).
• When the shuuer speed is high, lhe anlount of flash lighl may be insulllcienl even if you fire file flash.
You catt manually adjust the amount of light that passes through the lens.
(_) Select an aperture value using the.jog dial (page 32).
When the zoom is set lully to the W side, you can select an aperture tram F2.8 to F8.O.
When the zoom is sel hilly to the T side, you ctm selecl all aperture fionl F3.7 to FS.0.
@ Shoot the image.
• The shutter speed is automatically adjusted ftom 1/100tt to 8 seconds. When you sel all aperture value of
F5.6 or morn, the values start fiom l/2ftO0 second.
• If the propel exposure is nol obtained after making file seuings, tile setting value indicators on the screen
flash when the shutler buuon is pressed hall\ray down. You call sbool ill lhis condilion, bul we
recommend that you adjust the flashing values again.
• The flash is sel 1o {t (Flash lorced on/, _sl_ /Slow synchro) or _ (Flash lotted oft).
36