Sony Cyber-shot DSC-H5 User's Manual / Troubleshooting page 107

II
'_ (Vibration warning indicator)
• CaIIleFa shake []lily OL'L'ur due to
insufficient light. Use the flash, mm on
the anti-blur fimction, or mount the
C_ll]]era on _l
tripod to secure the
cHlnenl.
640(Fine) is not available
• (s40(Fine) size movies can be recorded
only using a "Memory Stick PRO Duo".
Insert a "Memory Stick PRO Duo" or
set the image size to a size other than
[640(Fine)].
Enable printer to connect
• [USB Connect] is set to [PictBridge],
bOWLWer the cHlilel_l is connectL_d to _1
non-PictBridge compliant device.
Check the device.
• The connection is not established.
Disconnect the USB cable, and connect
it again. If an error message is indicated
on the printer, refer to the operating
insmlctions supplied with the printer.
Connect to PictBridge device
• You tried to print images bel_)re the
printer connection was established.
Connect to a PictBridge compliant
printer.
No printable image
• You tried to execute [DPOF image]
without placing a DPOF (Print order)
mark on the image(s).
• You tried to execute JAil In This Folder]
while a folder that holds only movies
was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
• Check the printer.
Printer error
• Check the printer.
• Check if the image you x_antto print is
corrupted.
• The data transmission to the printer may
not be completed yet. Do not disconnect
the USB cable.
Processing
• The printer is canceling the current print
job. You cannot print until it is finished.
This may take time, depending on the
printer.
107