Using An S-Air Product - Sony DAV-HDX275 Operating Instructions Manual

Using an S-AIR Product
(DA V-HDX275/DA V-HDX475 only)
The unit is compatible with the S-AIR fnnction
(page 104), which allows sound transmission
between S-AIR products.
When yon pro'chase the S-AIR product, you
need to perti)rrn the l\>llnwing settings to
establish the sound transmission.
About S-AIR products
There are two types of S=AIR product.
• S-AIR main unit
(this unit):
This is for
transmitting sound. You can use up to three
S-AIR main unit.
(The
number of usable
S-AIR main unit depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
Surround amplifier: You can enjoy
surround speaker sound wirelessly.
- S-AIR receiver: You can enjoy system
S()tllld in
another
ronln.
(
3
[======_ S-AIR sub unit
(S-AIR receiver)
S-AIR main unit
b .> j5
D................................................. .................................................. D
S-AIR sub unit
(surround amplifier)
To make use of the S-AIR tbnction,
you need to
insert the wireless transmitter (not supplied) into
the unit and the wireless transceiver (not
supplied) into the S-AIR sub nnit.
• When you insert the wireless transmitter/transceiver,
make sure that the AC power cord/mains lead) is not
connected to a wall outlet (mains).
• Do not touch the terminals of the wireless transmitter/
transceiver.
To insert the wireless transmitter
into the unit
1
Remove the screws and detach the slot
cover.
Rear of the unit
Slot cover
m
• Remove the screws from the slot cover bearing
the caution mark. Do not remove other screws.
• The slot cover is no hmger necessary; however.
keep it after delaching.
Insert the wireless transmitter.
0
o
o
"t-
rll
1>
<
77G8