Sony DAV-HDX275 Operating Instructions Manual page 69

Hide thumbs Also See for DAV-HDX275:
Table of Contents

Advertisement

[ON]: The test tone is emitted fl'onl each speaker
in sequence while adjusting level. When you
select one of the [SPEAKER
SETUP] items, the
test tone is emitted fl'om each speaker
in
sequence.
Adjust the sound level as follows.
1
Set the [TEST TONE] to [ON].
2
Press <-/I,/4,/-> repeatedly to select the
desired speaker and the level.
3
Press @.
4
Repeat Steps 1 to 3.
5
Press <-/t,/4,/+ repeatedly to set [TEST
TONE] to [OFF] after adjusting the
speaker level.
rr_t_
• The test tone signals are not output from the HDMI
OUT .jack.
• To a(!just the volume
of all the speakers
at one time,
turn the VOLUME
comrol on the unit, or press
VOLUME
+_ on the remote.
• To return to the default
setting when changing
a
setting_ select the item, then press CLEAR.
Note that
only the [CONNECTION]
setting does not return to
the default
setting.
o
6gGB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dav-hdx276Dav-hdx475

Table of Contents