Changing The Power Illuminator; Viewing Information About The Disc In The Display; Checking The Remaining Time - Sony MHC-GN770 Operating Instructions Manual

Press I LLUMINATION
repeatedly to select
the power illuminator you want when the
system is turned on.
Each time you press the button, the power
illuminator changes cyclically as follows:
PATTERN 1 ---+ PATTERN 2 ---+
PATTERN 3 ---+ PATTERN 4 ---+
PATTERN OFF (No display)
Notes
• When _u tmn VOLUME (or press VOLUME +_
on the remote), power ilhuninator shows the cmrent
volume level
• During the demonstiation display, you can turn on or
offpower illuminator by pressing ILLUMINATION.
You can check the playing time and remaining
time of the current track or that of the disc.
When a CD-TEXT disc or a disc with MP3
audio tracks is loaded, you can also check the
inl)rmation recorded on disc, such as the titles.
When the system detects (D-TEXT discs,
"CD TEXT" lights up in the display.
Checking the remaining time
Press DISPLAY repeatedly during
playback.
Each time you press the button, the display
changes cyclically as follows:
Playing time of the current track---+ Remaining
time of the current track I) ---+ Remaining time of
the current disc 2) --* Title of the current track 3)
---+ Title of the current albmn (for a f_w
seconds) 4) ---+ Clock display (for 8 seconds) ---+
Effect status (l)r 8 seconds)
1) .__.__,, appears while an NIP3 audio track is played
back.
2) .__.__,, appears in the tbllowing cases:
while MP3 audio tracks are played back.
All play modes except "IDISC" or "ALBM".
3) Only for CD-TEXT disc and a disc with MP3 audio
tracks
When the CD-TEXT disc contains more than 20
tracks, the current track title is not displayed fiom
track 21 onwards
4) Only :fbr a disc with MP3 mldio tracks
u
"O
continued
31o8