Creating Your Own Program; Program Play - Sony MHC-GN770 Operating Instructions Manual

-- Program Play
You can make a program of up to 25 steps in the
order you want to be played back.
You can synchro record the programmed tracks
onto a tape (page 20).
1
Press CD.
_, When playback is stopped, press PLAY
MODE repeatedly until "PGM" lights up
in the display.
3 Press EX-CHANGE/DISC SKIP or
DISC 1 ~ 3 buttons (or DISC SKIP on the
remote) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 while "AL" appears in the
display.
To program all the MP3 audio tracks on
an albmn at once, turn and hold ALBUM
clockwise or counterclockwise and
release it at the album you want (or press
ALBUM + repeatedly on the remote),
then proceed to step 5.
4 Turn P<l<l _ clockwise or
counterclockwise (or press IH_I+ or -
PeP<repeatedly on the remote) until the
track number you want appears in the
display.
The total playing time flashes.
When programming an MP3 audio track,
turn and hold ALBUM clockwise or
counterclockwise and release it at the album
you want (or press ALBUM + repeatedly
on the remote), then turn _
clockwise or counterclockwise (or press
I_P4+ or _ repeatedly on the remote)
mltil the track munber you want appears in
the display.
Total playing time
Disc tray
number Track (including selected
number track)
CI]1-8
i.... }@," @ @ '7° . .....
Press ENTER,
The track(s) is(are) programmed.
The program step number appears in the
display for a while.
To program additional discs or tracks.
To program Repeat steps
Other discs 3 and 5
Other tracks on the 4 and 5
same disc
Othei tracks on 3 to 5
other discs
7 Press _111_- (or I=_ on the remote).
Program Play starts.
Other operations
To Do this
Cancel Piogram When playback is stopped press
Play PLAY MODE repeatedly until
"PGM" disappeai in the display
Clear a tiack from Press CLEAR on the iemote
the end ofprogram when playback is stopped.
Tips
• The program you made remains after Prograln Play
finishes To play the same program again, press
I_ (or li_ on the remote).
• If"--.--" appears instead of the total playing time
during programming, this means:
you have programmed a track numbel which
exceeds 20.
the total playing time has exceeded 100 minutes
you have programmed an MP3 audio tlack.
O
"o
(oo