Table of Contents
Advertisement
8
Press
ENTER.
The type of timer (PLAY TIMER),
followed by the start time, the stop time and
the music source appears, then the original
display appears.
9
Press I/_
to turn off the system.
Other
operations
To
Do this
Check the setting
1 Press CLOCK,'TIMER
SELECT.
2 Press I_t+ or
:epeatedly to select "PLAY
SELECT'?", then press
ENTER.
Change the setting
Sta:t from step 1.
Cancel the timer
1 Press CLOCK/TIMER
SELECT.
2 Press I_t+ o:
:epeatedly to select "TINIER
OFF'?" fl:en p:ess ENTER.
Notes
• You cannot select the Play Timer and Timer
Recording at the same time
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The Play Tin:e: will not be activated if the system is
Oil.
Tip
The system U_rnson 15 seconds befo:e filepreset time
You can record a preset radio station from a
specified
time.
To make a timer recording,
you must first preset
the radio station (see "Presetting
radio stations"
on page 16) and set the clock (see "Setting the
clock" on page 11).
Use buttons
on the remote for the operation.
1
Tune in the preset radio station (see
"Listening
to a preset station" on
page 18).
2
Press CLOCK/TIMER
SET,
"SET" appears in the display, ibllowed
by
"PLAY SET?".
Press I_1+
or -I.ql_l repeatedly to
select "REC SET?", then press ENTER.
"ON" appears and the hour indication
flashes in the display.
4
Set the time to start recording.
Press I1_t+
or
_
repeatedly
to set the
hour, then press ENTER.
The minute indication
start flashing.
Press I1_1+ or
_
repeatedly
to set the
minute, then press ENTER.
5
Set the time to stop recording
following
the same procedure as step 4.
The type of timer (RE('),
followed by the
start time, the stop time and the preset radio
station to be recorded
(e.g., "TE%:ER FM
5") appears, then the original display
appears.
Load a recordable tape into Deck B.
7
Press TAPE repeatedly to select
"TAPE B".
2808
Hide quick links:
Advertisement
Table of Contents
