Loading A Tape; Playing A Tape - Sony MHC-GN770 Operating Instructions Manual

1
2
3
Press TAPE A/B (or TAPE on the
remote) repeatedly to select Deck A
or B.
Press _-- A/B on the selected deck.
Load a tape into Deck A or B,
With the side
you want to
play/record
facing
forward
You can use TYPE I (normal) tape.
1 Load atape,
2 Press DIRECTION repeatedly to select
"_--" to play one side, "c_-) ''.1 to play
both sides or "RELAY ''.2 (Relay Play)
to play both decks in succession.
3 Press _111= ._ (or I_- on the remote).
The tape starts playing.
Press "111_ (or _ on the remote) again to
play the reverse side.
Tape presence indicator
TAPE A >>>._
i Playback stops automatically after repeating
the sequence tbr five times
2 Relay Play follows this cyclic sequence up to
fi,¢e tinies, then stops:
MHC-GN990'GN880iGN770 only
Deck A (fiont side) --* Deck A (reverse side)
Deck B (fiont side) --* Deck B (reveise
side)
MHC-GXg000iGN600 only
Deck A (flont side) --* Deck B (fiont side) --*
Deck B (reverse side)
Note
MHC-GXg000iGN660 only
You can only playback flont side of the tape in Deck A.
Other operations
To Do this
Stop playback Pless 1.
Panse playback Press II. Press II again to resume
playback
Fast-fm_vard or Turn and hold _ I_ clockwise
rewind or cotmterclockavise and release it
at the point you want (or press I_
or _ repeatedly on the remote).
Press A A or A B
Remove a
tape
#
"o
@
I
"1o
continued
19o8