After Operation; Storing The Grass Catcher; Mowing Without The Blower - Simplicity 5100251-00 Operator's Manual

General O perating instructions
AFTER OPERATION
Remove any debris from the the screen on the under-
side of the lid. Note: The lid screen can be partially
removed for easier cleaning and should be cleaned reg-
ularly.
The blower housing and tube should be removed for
cleaning.
Inspect the grass bags for wear or damage. Make sure
that there is a snug fit between mower deck, blower
housing, tubes, and grass catcher cover.
STORING THE GRASS CATCHER
Clean the grass catcher thoroughly using a mild deter-
gent (other products may damage the tube). Remove
any debris from the the screen on the underside of the
lid. The screen can be partially removed for easier clean-
ing.
If paint has been scratched on metal parts, touch up
with paint, or apply a thin film of oil to prevent corrosion.
Store in a dry area. Hang the catcher and catcher bags
to dry thoroughly before storing for a long period of time.
Always store away from moisture.
MOWING WITHOUT THE BLOWER
For operation without the blower, the deflector must be
properly installed in the down position.
To remove the blower, see BLOWER & COLLECTOR
REMOVAL on page 19.
5