Simplicity 5100251-00 Operator's Manual page 19

WeightMountInstallation
(StallionSeries)
Install Weight Mount Rack
1. Measure and mark the front main frame tubes to the
dimensions shown in Figure 24.
2. Using a 3/8" drill bit, drill one (1) hole in each of the
main frame tubes from the outside surface of the
tube.
Figure 24. Hole Location
3. Slide the weight mount rack into the main frame
tubes and align with the holes drilled through the
frame (see Figure 25). It may require you drive the
arms into the frame tubes using a wooden block and
hammer.
4. Finish drilling through the opposite wall of the frame
tubes using the weight rack as a guide.
5. Install the 3/8" bolts from the inside of the frame rail
and fasten securely with the nylon lock nuts.
I..................
Figure 25. Weight Rack Installation
6. Install the counter weights supplied with the grass
collector on the weight mount rack (see Figure 26).
7. Install the weight retainer rod through the weight
mount rack and secure with the hairpin clips (see
Figure 26).
Figure 26. Weight & Retainer Rod Installation
18