Simplicity 5100251-00 Operator's Manual page 15

Collectorinstallation
Assemble Back Plate & Mount Frame
1. Attach the back plate (A, Figure 18) to the mount
frame (B) using carriage bolts, flat washers, and
nuts. Use two 5/16-18 x 3/4" carriage bolts (D) in the
top two holes, and two 5/16-18 x 1-1/4" carriage
bolts (E) in the bottom holes.
2. Install the cover latch (H, Figure 18) and reinforce-
ment plate (G). Secure with two 5/16-18 x 3/4" bolts
(F), and 5/16-18 serrated flange nuts (J).
3. Mount the back plate to the support assembly and
secure with the long hitch pin (K, Figure 18) and hair
pin clip (L).
Figure 18. Install Back Plate
A. Back Plate
B. Mount Frame
C. 5/16-18 Nylon Lock Nuts
D. 5/16-18 x 3/4 Carriage Bolts
E. 5/16-18 x 1-1/4 Carriage Bolts
F. 5/16-18 x 1 Bolts
G. Latch Reinforcement Plate
H. Cover Latch
I. 5/16" Flat Washers
J. 5/16-18 Serrated Flange Nuts
K. Hitch Pin
L. Hair Pin Clip
14