Simplicity 5100251-00 Operator's Manual page 21

Blower & CollectorRemoval
6. Reinstall the discharge chute (A, Figure 29), torsion
spring (B), 5/16" fender washer (C), spring spacer
(D) and secure with the supplied quick attach rod (E)
and hairpin clips (F).
7. Empty the grass collector bags and reinstall in the
bagger frame.
Figure 29. Reinstall Discharge Chute
A. Discharge Chute
B. Torsion Spring
C. 5/16" Fender Washer
D. Spring Spacer
E. Quick Attach Rod
E Hairpin Clip
8. Remove the hitch pin (A, Figure 30) and hair pin clip
(B) securing the mount frame (C) to the mount plate.
9. Lift the bagger unit up and off of the mount plate.
Figure 30. Remove Hitch Pins
A. Hitch Pin
B. Hair Pin Clip
C. Mount Frame
20