Collectorinstallation - Simplicity 5100251-00 Operator's Manual

Collectorinstallation
Install Mount Plate
(Citation Models)
1. Install the adapter plate (A, Figure 16) onto the
mount plate (B) and secure with the 3/8-16 x 1" bolts
(C) and 3/8-16 nylock flange nuts (D).
2. Install the mount plate onto the bumper.
3. Install the mount spacers (E) between the adapter
plate and mount plate, as shown, and loosely secure
with the 3/8-16 x 2-1/2" bolts (F) and 3/8-16 nylock
flange nuts (D).
4. Install the 3/8" U-bolts (G) on the bottom bumper
tube and through the mount plate. Loosely install the
3/8-16 nylock flange nuts (D).
5. Center the mount plate, side-to-side, on the bumper
tubes and tighten hardware securely.
©
Figure 16. Install Mount Plate - Citation
A. Adapter Plate
B. Mount Plate
C. 3/8-16 x 1" Bolts
D. 3/8-16 Nylock Flange Nuts
E. Mount Spacers
F. 3/8-16 x 2-1/2" Bolts
G. 3/8" U-Bolts
Install Mount Plate
(Stallion Models)
1. Install the mount plate (A, Figure 17) on the bumper
using four 3/8-16 x 1" bolts (B) and 3/8-16 flange
nuts (C). Tighten hardware securely.
Figure 16. Install Mount Plate - Stallion
A. Mount Plate
B. 3/8-16 x 1" Bolts
C. 3/8-16 Flange Nuts
13