Mowing Heightadjustment; Foot Pedaladjustment - Snapper 500Z Series Safety Instructions & Operator's Manual

OperaUofl
Mowing HeightAdjustment
The cutting height adjustment pin (A, Figure 6) controls the
mower cutting height. The cutting height is adjustable
between 1-1/2" (3,37 cm) and 4-1/2" (11,47 cm) in 1/4"
(0,64 cm) increments.
1. Depressthe deck lift foot pedal (B) until it locks into the
4-1/2" (11,47 cm) position.
2. Placethe cutting height adjustment pin in the desired
cutting height.
3. Depressthe deck lift foot pedal then push the lock lever
(C) toward the right to releasethe lock.
4. Releasethe deck lift foot pedal until it comes to rest
against the cutting height adjustment pin.
Foot PedalAdjustment
The deck lift foot pedal can be adjusted to accommodate the
operator's height for optimal comfort.
To adjust pedal position:
1. Removethe foot pedal (A, Figure 7) from the pedal
mount tab (B).
2. Removethe pedal mount hardware (C) and rotate the
tab 180 degrees.
3. Reinstall the pedal mount hardware and tighten securely.
4. Reinstall the foot pedal on the pedal mount tab in the
proper orientation as shown in Figure 7.
Figure 6, Mowing Height Adjustment
A. Cutting Height Adjustment Pin
B, Deck Lift Foot Pedal
C. Deck Lift Lock/ever
Figure 7. Foot PedalAdjustment
A. Deck Lift Foot Pedal
B, Pedal Mount Tab
C. Pedal Mount Hardware
D. Optional Position
15