Section 4: Operations; Disabling & Locking Switch (G0513, G0513P, G0513Anv, G0513X2) - Grizzly G0513 SERIES Owner's Manual

SEcTION 4: OPERATIONS

Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
children or untrained people can be
seriously injured by this machine. This
risk increases with unsupervised operation.
To help prevent unsupervised operation,
disable and lock the switch before leaving
machine unattended! Place key in a well-
hidden or secure location.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REc-
OMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
G0513 Series Bandsaws
Disabling & Locking
Switch (G0513,
G0513P, G0513ANV,
G0513X2)
the switch can be disabled and locked by inserting
a padlock through the power button, as shown in
Figure 58. locking the switch in this manner can
prevent unauthorized operation of the machine,
which is especially important if the machine is not
stored inside an access-restricted building.
IMPORTANT: locking the switch with a padlock
only restricts its function. it is not a substitute
for disconnecting power from the machine when
adjusting or servicing.
Shaft
Figure 58. switch disabled by a padlock.
The padlock shaft diameter is important to
the disabling function of the switch. With
any padlock used to lock the switch, test the
switch after installation to ensure that it is
properly disabled.
Padlock
-39-