Disabling & Locking Switch (G0513X2B, G0513X2Bf, G0513X2F); General Overview; Straight Cuts; Irregular Cuts - Grizzly G0513 SERIES Owner's Manual

Disabling & Locking
Switch (G0513X2B,
G0513X2BF,
G0513X2F)
The power switch can be disabled and locked by
removing the key, as shown. Locking the switch
in this manner can prevent unauthorized opera-
tion of the machine, which is especially important
if the machine is not stored inside an access-
restricted building.
IMPORTANT: Locking the power switch with a
key only restricts its function. It is not a substitute
for disconnecting power from the machine when
adjusting or servicing.
Children or untrained people can be killed
or seriously injured by this machine. This
risk increases with unsupervised operation.
To help prevent unsupervised operation,
remove the key from the switch before
leaving machine unattended! Place key in a
well-hidden or secure location.
-40-
P O
W E
0
R
I

General Overview

the bandsaw is one of the most versatile wood
cutting tools in the shop. it is capable of perform-
ing many different cutting functions including:

Straight cuts

• Miters
• angles
• Compound angles
• resawing
• ripping
• Crosscutting

Irregular cuts

• simple and Complex Curves
• duplicate parts
• Circles
• Beveled Curves
a properly adjusted and tuned bandsaw can be
safer to operate than most other saws and per-
forms many functions with ease and accuracy.

Basic cutting Tips

Here are some basic tips to follow when oper-
ating the bandsaw:
• replace, sharpen, and clean blades as nec-
essary and make adjustments periodically to
keep the saw always running in top condi-
tion.
• use a light and even feed rate while cutting.
light contact with the blade will permit easier
line following and prevent undue friction.
• avoid trying to turn tight corners because this
will twist the blade. remember, you must saw
around corners.
• Misuse of the saw or using incorrect tech-
niques is unsafe and results in frustration and
poor cuts. remember—the blade does the
cutting with the operator's guidance.
G0513 Series Bandsaws