Rear Pane - Samsung HCN5527W Owner's Instructions Manual

Your NEw TV ]
Rear Panel Jacks (Depending on the model)
Use the zear parle] jacks to connect an A/V component that _vi[] be connected continu
ously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two diffVrent A/V components
(i.e., a VCR and a DVD, 2 VCRs, etc.)
For more inft_rmation oil connecting equipment, see pages 2.1 2.10.
0 00 • 0 • 0 0 0
() ANTENNA terminals
Two independent cables or antennas can be
connected to these terminals, Use ANT-A and
ANTB terminals to receive a signal from VHF/
UHFantennas or your cable system.
Use the ANT-A OUTterminal to send the signal
being received by the ANTA terminal out to
another component (such as a Cable Set Top Box).
The PIP channel can be received only when
a signal source is connected to ANTA,
O
AUDIO-VIDEO MONITOR
OUTPUT jacks
Connect to the audio/video inputjacks of
a recording VCR.
Note: The monitor out does not operate
in DVD or DTV mode.
O
VIDEO INPUT jacks
Connect to the video output jacks of VCRs,
DVD players and similar devices (Two sets
are available: Video1 and Video2),
O AUDIO INPUTjacks
Connect to the audio outputjacks of VCRs,
DVD players and similar devices,
O S-VIDEO INPUT jack
Connect t o an S VHSVCR or DVDplayer,
0 COMPONENT 1(480i, 480p,
1080i) AUDIO/VIDEO INPUT
jacks
Connect a sourcethatoutputs480i/480p/1080i Y.P,_
andP signals, s uchasa DVD (orDTV Set Top Box.
O
DIGITAL INPUT (Digital
Visual Interface) jack
Receives the digitalvideosignalsfroma settop
box.(TheDVIjackis notavailableon PCN5425R.)
0 COMPONENT 2, 3(480p,
1080i) AUDIO/VIDEO INPUT
jacks
Connect a sourcethatoutputs480p/1080i Y,
PE_ andP.signals,suchasa DTV Set TopBox,
(Component3 jacks ;Depending on the model)
0
DVI AUDIO INPUT jacks
Receives the digital audio signals from a set top
box,