Side Panel Led Indicators; Rear Panel Jacks - Samsung HLK436W Instruction Manual

Your New Wide TV

Side Panel LED Indicators

The three lights on the side panel indicate the status of your TV.
Indicator Light Key
: Light is On
: Light is Blinking
: Light is Off
• It takes about 30 seconds for the TV to warm up, so normal brightness may not appear
immediately.
• The TV has a fan to keep the inside lamp from overheating. You'll occasionally hear it
working.
12
Your New Wide TV

Rear Panel Jacks

Use the rear panel jacks to connect components such as a VCR or laserdisc player.
You can connect two different components such as two VCRs, a laserdisc player and a DVD play-
er etc., because there are two sets of video input jacks and one set of component video input
jacks on the rear panel of your TV. For more information, please see "Connections".
ΠANTENNA terminals
Two independent cables or antennas can be connected to these termi-
nals. Use ANT-A and ANT-B terminals to receive a signal from
VHF/UHF antennas or your cable system. Use the ANT-A OUT termi-
nal to send the signal being received by the ANT-A terminal out to
another component (such as a Cable Set Top Box).
The PIP channel can be received only when a signal source is
connected to ANT-A.
´ S-VIDEO IN jack
Connects an S-Video signal from an S-VHS VCR or laserdisc player.
ˇ VIDEO INPUT jacks(V1, V2)
Connect video signals from external sources like VCRs or DVD play-
ers.
AUDIO INPUT jacks(L1,R1/L2,R2)
Connect audio signals from external sources like VCRs or DVD play-
ers.
¨ VIDEO MONITOR OUT jack
Sends a video signal from the TV to an external source, such as a
VCR.
AUDIO MONITOR OUT jacks
Send audio signals from the TV to an external source, such as a VCR.
ˆ COMPONENT AUDIO INPUT jacks (L, R)
Use these jacks to connect the audio signals from a DVD player when
using the component video input jacks.
COMPONENT VIDEO INPUT jacks (Y, P , P
B R
Use these jacks to connect the component video signals from
a DVD player.
Note: Only 480i format is supported in its original format.
Ø HD Component (set top) VIDEO INPUT jacks
(Y, P , P )
B R
Receives the DTV video signals (Y/P /P ) from a set top box.
B R
Note: Only 480p, 720p and 1080i formats are supported in their
original formats.
HD Component (set top) AUDIO INPUT jacks
(L, R)
Receives the DTV audio signals (L/R) from a set top box.
∏ SURROUND OUTPUT jacks
Use to connect a subwoofer and powered rear surround speakers.
13
)