Rear Panel Jacks - Samsung HLN507W1X/XAA Service Manual

1-18 Rear Panel Jacks

Use the rear panel jacks to connect components such as a VCR.
You can connect two different components such as two VCRs, a Set-Top Box and a DVD player etc.,
because there are two sets of video input jacks and one set of component video input jacks on the rearpanel of your TV.
For more information, please see " Connections".
Œ
ANTENNA terminals
Two independent cables or antennas can be connected to these
terminals. Use ANT-A and ANT-B terminals to receive a signal
from VHF/UHF antennas or your cable system. Use the ANT-A
OUT terminal to send the signal being received by the ANT-A
terminal out to another component (such as a Cable Set Top
Box).
The PIP channel can be received only when a signal source is
connected to ANT-A.
´
S-VIDEO INPUT jacks
Connects an S-Video signal from an S-VHS VCR or DVD player.
ˇ
VIDEO/AUDIO INPUT jacks(VCR1, VCR2)
Connect video/audio signals from external sources,such as a
VCR or DVD players.
¨
VIDEO/AUDIO MONITOR OUTPUT jacks
Sends a video signal from the TV to an external source, such as
a VCR.
Note: Monitor Out is available only in RF, Video and S-Video
modes.
Samsung Electronics
ˆ
COMPONENT1,2,3 jacks (Y, Pb, Pr, L, R)
Use these jacks to connect the component video/audio signals
from a DVD player or a set top box when using the component
video input jacks.
Ø
PC/DVI AUDIO INPUT jacks
Connect these to the audio-output jacks on your PC or set top
box.
∏
DVI (Digital Video Interface) jack
Receives the digital signals from a set top box or PC etc.
"
RS-232C jack
Jack RS232 is for repair and software upgrade.
'
PC VIDEO INPUT jack
Connect to the video output port on your PC.
Alignment and Adjustments
1-53