Download  Print this page

Setting Up The Tv With Your Pc - Samsung PN50C550 User Manual

540/550/590 series.
Hide thumbs

Advertisement

Basic Features
Pixel Shift (Off / On): Using this function, you can
minutely move pixels on the PDP in horizontal or vertical
direction to minimize after images on the screen.
Optimum condition for pixel shift
Setting up the TV with Your PC
Set the input source to PC.
(_
MENUiTrl _ Picture --_ ENTERE_
Horizontal
0~4
4
Vertical
0~4
4
Time(minute)
1~4 rain.
4 rain.
The Pixel Shift value may differ depending on the
TV size (inches) and mode.
This function is not available in the Screen Fit
mode.
Auto Protection Time (10 min. / 20 min. / 40 min. / 1
hour/Off):
Set the time the screen remains idle with a
still image until the screen saver is activated. The Screen
Saver prevents the formation of ghost images on the
screen.
Scrolling: This function removes after-images on the
screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after-images or symbols on the screen, especially when
you displayed a still image on the screen for a long time.
The after-image removal function has to be
executed for a long time (approximately 1 hour)
to effectively remove after-images on the screen.
If the after-image is not removed after performing
the function, repeat the function again.
Press any key on the remote control to cancel this
feature.
Side Gray (Light / Dark): When you watch TV with the
screen ratio set to 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.
Picture Reset (OK!Cance0
..............................................................................................
Resets your current picture mode to its default settings.
Auto Adjustment
..................................................................................
Adjust frequency values/positions and fine tune the settings
automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
Ill
Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Ill
Position: Adjust the PC's screen positioning if it does
not fit the TV screen. Press the A or T button to adjust
the Vertical-Position. Press the _ or !_ button to adjust
the Horizontal-Position.
Ill
Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1.
Click on "Control Panel" on the Windows start menu.
2.
Click on "Appearance and Themes" in the "Control
Panel" window and a display dialog-box will appear.
3.
Click on "Display" and a display dialog box will appear.
4.
Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
If a vertical-frequency option exists on your display
settings dialog box, the correct value is "60" or "60 Hz".
Otherwise, just click "OK" and exit the dialog box.
0
English
[PC550]BN68
02580A
Eng.indb
20
2010
02
10
£_
4:51:00

Advertisement

Table of Contents

   Related Manuals for Samsung PN50C550

This manual is also suitable for:

Pn58c550Pn50c540Pn50c590Pn58c540Pn58c590

Comments to this Manuals

Symbols: 0
Latest comments: