Setting up the TV with your PC
Preset: Press the
SOURCE button to select PC mode.
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video
signal. The values of fine, coarse and position are adjusted automatically.
This function does not work in DVI-HDMI mode.
TOOLS button to display Tools menu.
You can also set the auto adjustment by selecting Tools → Auto Adjustment.
The purpose of picture quality adjustment is to remove or reduce picture noise. If the
noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so
that it is aligned on the center of screen.
Adjusts the frequency when vertical noise appears on the screen.
Adjusts the screen to be clearer.
Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
You can replace all image settings with the factory default values.
English - 18