Display Modes; Setting Up The Tv With Your Pc - Samsung 450 Series User Manual

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video.
For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub and HDMI/DVI Input

Mode Resolution
640 x 350
IBM
720 x 400
640 x 480
MAC
832 x 624
640 x 480
800 x 600
VESA DMT
1 024 x 768
1 360 x 768
720 x 576
VESA CVT
1 280 x 720
VESA GTF 1 280 x 720
When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal.
N
The interlace mode is not supported.
N
The TV operates abnormally if a non-standard video format is selected.
N
The " c "mark means that this mode is supported.
N

Setting up the TV with your PC

Auto Adjustment
❑
Use the auto adjustment function to have the TV set automatically adjust the video
signals it receives. The function also automatically fine-tunes the settings and adjusts
the frequency values and positions.
Preset: Press the SOURCE button to select PC mode.
N
This function does not work in DVI-Digital mode.
N
Press the TOOLS button to display Tools menu.
T
You can also set the adjustment by selecting Tools → → Auto Adjustment.
Screen
❑
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then make the vertical frequency
adjustments on your PC and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned on the center
of the screen.
Preset: Press the SOURCE button to select PC mode.
N
Coarse

Adjusts the frequency when vertical noise appears on the screen.
Fine

Adjusts the screen to be clearer.
PC Position

Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼
button to adjusting the Vertical-Position. Press the ◄ or ►button to adjust the
Horizontal-Position.
Image Reset

You can replace all image settings with the factory default values.
Horizontal Vertical
Frequency (kHz) Frequency (Hz)
31.469 70.086
31.469 70.087
35.000 66.667
49.726 74.551
31.469 59.940
37.861 72.809
37.500 75.000
37.879 60.317
48.077 72.188
46.875 75.000
48.363 60.004
56.476 70.069
60.023 75.029
47.712 60.015
35.910 59.950
44.772 59.855
56.456 74.777
52.500 70.000
English - 
Pixel Clock Sync Polarity
Frequency (MHz) (H/V)
25.175 + / -
28.322 - / +
30.240 - / -
57.284 - / -
25.175 - / -
31.500 - / -
31.500 - / -
40.000 + / +
50.000 + / +
49.500 + / +
65.000 - / -
75.000 - / -
78.750 + / +
85.500 + / +
32.750 - / +
74.500 - / +
95.750 - / +
89.040 - / +
PL4B450B1 PL50B450B1
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓
✓ ✓
✓
✓
✓
T V Picture
Mode : Dynamic
Picture
Cell Light
Contrast
Brightness
Sound
Sharpness
Auto Adjustment
Channel
Screen
Advanced Settings
Picture Options
Setup
Reset : OK
Input
Move Enter
T V Screen
Coarse
Picture
Fine
PC Position
Image Reset
Sound
Channel
Setup
Input
Move Enter
T V PC Position
Picture
Sound
Channel
Setup
Input
Move Enter
10
100
45
50

Return
50
63
Return
Return