When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
(Not Supplied) "_1
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER (b button. Plug & Play is available only when the Input source is set to T_.
To return to the previous step, press the Red button.
Selecting a language
Selecting Store Demo
or Home Use
Selecting an antenna
Press the A or _' button, then press the ENTERE__ button.
Select the desired OSD (On Screen Display) language.
Press the ,_ or !_ button, then press the ENTERE_ button.
Select the Home Use mode. Store Demo Mode is for retail
,_ To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold MENU for 5 sec.
Press the A or • button, then press the ENTERI_%_ button. Select Air, Cable or Auto.
Selecting acr anne
Setting the Clock
vtewlng the HD
Press the A or T button, then press the ENTERIZ_ button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel --_ Auto Program (p. 15).
Press the ENTERE*3 J button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
Auto: Allows you to select DST (Daylight Saving Time) mode and time zone
Manual: Allows you to manually set the current date and time (p. 22).
The connection method for the best HD screen quality is displayed.
Press the ENTERI_%_ button.
If You Want to Reset This Feature...
MENU iTrl --_ Setup _ Plug & Play _ ENTERI__