Changing Channels - Samsung LN52A550 User Manual

1
Press the ENTER C,-' button.
Press the A or T button to select "Auto", then Press the ENTER _ button.
The message "Set to daylight saving time." is displayed.
If you select "Manual", "Set current date and time" is displayed.
(See page 45)
7. Press the A or T button to select "Off' or "On", then press the ENTER
button. The message "Select the time zone in which you live." is displayed.
8. Press the A or T button to highlight the time zone for your local area.
Press the ENTER C# button. If you have received a digital signal, the time
will be set automatically. If not, see page 45 to set the clock.
9. The message "Enjoy your watching." is displayed.
When you have finished, press the ENTER _ button.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER _ button.
2. Press the ENTER _ button again to select "Plug & Play".
For further details on setting up options, refer to the pages 12-13.
>_ The "Plug & Play" feature is only available in the TV mode.
Changing Channels
Using the Channel Buttons
1
Press the CH v or CH ^ button to change channels.
>_ When you press the CH v or CH ^ button, the TV changes channels in
sequence.
You will see all the channels that the TV has memorized. (The TV must
have memorized at least three channels). You will not see channels that
were either erased or not memorized. See page 16 to memorize channels.
Using the Number Buttons
1
Press the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7.
>- For quick channel change, press the number buttons, then press the
ENTER C:_ button.
MUTE _V _1 _
SOURCE
|