Samsung LN52A550 User Manual page 26

When Double ( [_, r-r-1 ) mode has been set in PIP, the Picture Size cannot be set.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
After selecting "Zoom1", "Zoom2" or "Wide Fit":
Press the 4 or I_ button to select "Position", then press the ENTER C ,-_
button. Press the A or T button to move the picture up and down.
Reset: Press the 4 or I_ button to select "Reset", then press the ENTER
[:_ button. You can initialize the setting.
After selecting "Just Scan" in HDMI (1080i/1080p) or Component
(1080i/1080p) mode:
Press the 4 or I_ button to select "Position", then press the ENTER C3_
button. Press the A, T, 4 or I_ button to move the picture.
Reset: Press the 4 or I_ button to select "Reset", then press the ENTER
E_ button. You can initialize the setting.
>- HD (High Definition)
16:9- 1080i/1080p (1920x1080), 720p (1280x720)
>- Settings can be adjusted and stored for each external device you have connected to an input of the TV.
ATV, Video, S-Video, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P) 16:9, 4:3, Wide Fit, Just Scan
PC 16:9, 4:3
Alternately, you can press the P.SIZE button on the remote control repeatedly
to change the picture size.
t 6:9 Zoo ml
Sets the picture to 16:9 wide mode. Mag nifies the size of the picture on
the screen.
Zoom2=
Magnifies the size of the picture more
than "Zoom 1".
.Wide Fit
Enlarges the aspect ratio of the
picture to fit the entire screen.
Just Scan
Use the function to see the full
mage without any cutoff when HDMI
(720p/1080ill 080p), Component
(1080ii1080p) or DTV (1080i) signals
4:3
Sets the picture to 4:3 normal mode.
are input.