Download  Print this page

Advertisement

imagine the possibil ties
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www,samsung,com/global/register
Model
Serial No.

Advertisement

Table of Contents

   Also See for Samsung LN52A550

   Related Manuals for Samsung LN52A550

   Summary of Contents for Samsung LN52A550

  • Page 1 Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www,samsung,com/global/register Model Serial No.
  • Page 2 (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein. SAMSUNG will additionally provide Warranty Repair Service n the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States. for the warranty period originally specified, and to the Original Purchaser only.
  • Page 3: Table Of Contents

    Contents List of Features ..............[] Using Your TV as a Computer (PC) Display ....42 [] Accessories ..............[] Display Modes ..............[] Viewing the Control Panel ..........[] Setting up the TV with your PC ........[] Viewing the Connection Panel ......... [] Remote Control .............
  • Page 4: List Of Features

    General information List of Features - Adjustable picture settings that can be stored in the TV's memory. - Automatic timer to turn the TV on and off. - A special sleep timer. - Excellent Digital Interface & Networking With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver...
  • Page 5: Viewing The Control Panel

    Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV's basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Side Panel buttons >- The product color and shape may vary depending on the model.
  • Page 6: Viewing The Connection Panel

    Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as DVD players or a VCR. For more information on connecting equipment, see pages 6-11. = ii = iii = ii [TV Rear Panel] [TV Side Panel _L___...
  • Page 7: Remote Control

    Press to exit the menu. Press to display information the TV screen. DMA (Digital Media Adapter) Use this when connecting COLOR BUTTONS a SAMSUNG DMA device Use these buttons in the through an HDMI interface and Channel list, WISELINK, etc. switching to DMA mode.
  • Page 8: Installing Batteries In The Remote Control

    Installing Batteries in the Remote Control Lift the cover at the back of the remote control upward as shown in the figure. Install twoAAAsize batteries. >- Make sure to match the "+" and "-" ends of the batteries with the diagram inside the compartment.
  • Page 9: Connecting Cable Tv

    Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box Plug the incoming cable into the ANT IN terminal on the back of the TV. "_ Because this TV is cable-ready, you do not need a cable box to view .........
  • Page 10: [] Connecting A Dvd Player Or Cable Box/satellite Receiver (set-top Box) Via Hdmi

    Connectinga DVD Playeror Cable Bo×/Satellitereceiver(Set-TopBox) via HDIVll This connection can only be made if there is an HDMI Output connector on the external device. Connect an HDMI Cable TVSide Panel DVD Player or Cable Box/Satellite receiver between the HDMI IN (Set-Top Box) Rear Panel (1, 2 or 3)jack on the TV Rear Panel...
  • Page 11: Connecting A Dvd Player O Rcable Box/satellite Receiver (set-top B Ox)viacomponent Cables

    Connecting a DVD Player o rCable Box/Satellite receiver (Set-Top B ox)viaComponent cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. Connect a Component TV Rear Panel Cable between the COMPONENT DVD Player or Cable Box /...
  • Page 12: Connecting A Vcr

    VCR is stereo, you must connect two cables. S-Video Connection Your Samsung TV can be connected to an S-Video jack on a VCR. (This connection delivers a better picture as compared to a standard VCR.) To begin, follow steps "IV Rear Panel...
  • Page 13: Connecting A Digital Audio System

    Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV. Connect an Optical Cable TV Rear Panel Digital Audio System between the "DIGITAL AUDIO OUT (OPTICAL)"...
  • Page 14: Turning The Tv On And Off

    Operation Turning the TV On and Off Press the POWERCb button on the remote control. POWER You can also use the POWER(b button on the TV. ON/OFF Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically subsequently.
  • Page 15: Changing Channels

    Press the ENTER C,-' button. Press the A or T button to select "Auto", then Press the ENTER _ button. The message "Set to daylight saving time." is displayed. If you select "Manual", "Set current date and time" is displayed. (See page 45) Press the A or T button to select "Off' or "On", then press the ENTER button.
  • Page 16: Adjusting The Volume

    Using the I_3 Button The I_ button is used to select stations that broadcast a digital signal. For example, for Channel 7-1, press 7, then I_l, then 1. >- HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal.
  • Page 17: Using The Tools Button

    Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The "TOOLS" menu changes depending on which external input mode you are viewing. Press the TOOLS button. The "TOOLS" menu will appear. Press the A or T button to select a menu.
  • Page 18 Storing Channels in Memory (Automatic Method) Press the MENU button to display the menu. Press the A or T button to select "Channel", then press the ENTER E_ button. Press the A or T button to select "Auto Program", then press the ENTER button.
  • Page 19: To Select The Source

    To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. Press the MENU button to display the menu. Press the A or T button to select "Input", then press the ENTER _ button.
  • Page 20: Changing The Picture Standard

    Picture Control Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. Press the MENU button to display the menu. Press the ENTER C# button to select "Picture". Press the ENTER C ,-_ button to select "Mode". Press the A or T button to select "Dynamic", "Standard"...
  • Page 21: Adjusting The Detailed Settings

    Adjusting the Detailed Settings Samsung's new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Activating Detailed Settings Press the MENU button to display the menu. Press the ENTER O_ button to select "Picture".
  • Page 22 Adjusting the Gamma You can adjust the Primary Color (Red, Green, Blue) Intensity. (-3 - +3) Press the A or T button to select "Gamma", then press the ENTER button. Press the 411 or I_ button to decrease or increase the value. Press the ENTER C:;#button.
  • Page 23 Adjusting the White Balance can adjust the color temperature for more natural picture colors. Press the A or T button to select "White Balance", then press the ENTER _ button. Select the required option by pressing the A or T button, then press the ENTER _ button.
  • Page 24: Resetting The Picture Settings To The Factory Defaults

    Setting the xvYCC Setting the xvYCC mode to "On" increases detail and color space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. Press the A or T button to select "xvYCC", then press the ENTER button.
  • Page 25: Configuring Picture Options

    Configuring Picture Options Activating Picture Options Press the MENU button to display the menu. Press the ENTER _ button to select "Picture". Press the A or T button to select "Picture Options", then press the ENTER button. Press the A or T button to select a particular item.
  • Page 26 When Double ( [_, r-r-1 ) mode has been set in PIP, the Picture Size cannot be set. Temporary image retention may occur when viewing a static image on the set for more than two hours. After selecting "Zoom1", "Zoom2" or "Wide Fit": Press the 4 or I_ button to select "Position", then press the ENTER C ,-_ button.
  • Page 27 Setting the Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Follow the "Activating Picture Options" instructions numbers 1 and 2.
  • Page 28 Setting the Film Mode The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality. Follow the "Activating Picture Options" instructions numbers 1 and 2. (Refer to page 23) Press the A or T button to select "Film Mode", then press the ENTER button.
  • Page 29: Viewing Picture-in-picture

    Viewing Picture-in-Picture You can use the PIP feature to simultaneously watch the TV tuner (analog broadcasts only) and one external video source. (See page 33 to select the PIP picture sound.) This product has one built-in tuner, which does not allow PIP to function in the same mode.
  • Page 30 Changing the PiP Channel Press the A or T button to select "Air/Cable", then press the ENTER C:_ button. Press the A or T button to select "Air" or "Cable", then press the ENTER C_ button. Press the A or T button to select "Channel", then press the ENTER C_ button.
  • Page 31: Changing The Sound Standard

    Sound Control Changing the Sound Standard You can select the sound mode to best suit the programming you're watching. Press the MENU button to display the menu. Press the A or T button to select "Sound", then press the ENTER _ button.
  • Page 32: Setting The Trusurround Xt

    Press the A or T button to select a particular frequency to adjust. Press the _1 or _ button to increase or decrease the level of the particular frequency. ,Mode: Seiects the s0und mode among the predefined SettingS: ' Balance L/R AdjuStS the balance between the right and left speakeri Baod dth' Adjostment...
  • Page 33: Choosing Preferred Language

    Choosing Preferred Language The digitaI-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). Select the language you would like to hear the audio track in. Press the MENU button to display the menu. Press the A or T button to select "Sound", then press the ENTER C# button.
  • Page 34: Automatic Volume Control

    Automatic Volume Control Reduces the differences in volume level among broadcasters. Press the MENU button to display the menu. Press the A or T button to select "Sound", then press the ENTER C# button. Press the A or T button to select "Auto Volume", then press the ENTER C_ button.
  • Page 35: Listening To The Sound Of The Sub (pip) Picture

    Listening to the Sound of the Sub (PIP) Picture When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. Press the MENU button to display the menu. Press the A or T button to select "Sound", then press the ENTER C# button. Press the A or T button to select "Sound Select", then press the ENTER button.
  • Page 36: Managing Channels

    Channel Control Managing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. Viewing All Channels Show all currently available channels. To use the Channel List function, first run "Auto Program" (see page 16). Press the MENU button.
  • Page 37 Erasing and Adding Channels You can delete or add a channel to display the channels you want. Press the MENU button. Press the A or T button to select "Channel", then press the ENTER C_ button. Press the A or T button to select "Channel List", then press the ENTER C ,-_ button.
  • Page 38 Setting Your Favorite Channels You can set channels you watch frequently as favorites. Press the MENU button. Press the A or T button to select "Channel", then press the ENTER button. Press the A or T button to select "Channel List", then press the ENTER CM button.
  • Page 39 Reserving a Program (Timer Viewing) If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a program, set the current time first. See pages 45-46. Reserved channels can only be set if they are in the "Channel List"...
  • Page 40 Confirming a Viewing Reservation You can view, modify or delete a reservation. Press the MENU button. Press the A or T button to select "Channel", then press the ENTER C:_ button. Press the A or T button to select "Channel List", then press the ENTER CM button.
  • Page 41 Labeling Channels - Analog Channels can labeled so that their call letters appear whenever the channel is selected. Press the MENU button. Press the A or T button to select "Channel", then press the ENTER button. Press the A or T button to select "Channel List", then press the ENTER C,_ button.
  • Page 42: Clearing Scrambled Channels - Digital

    Clearing Scrambled Channels - Digital The "Clear Scrambled Channel" function is used to filter out scrambled channels after "Auto Program" is completed. This process may take up to 20-30 minutes. Press the MENU button to display the menu. Press the A or T button to select "Channel", then press the ENTER E:_ button.
  • Page 43: Checking The Digital-signal Strength

    Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel.
  • Page 44: Using Your Tv As A Computer (pc) Display

    (If not, contact your computer manufacturer or Samsung Dealer.) First, click on "Control Panel" on the Windows start menu. When the control panel window appears, click on "Appearance and Themes"...
  • Page 45: Setting Up The Tv With Your Pc

    Setting up the TV with your PC How to Auto Adjust Use the Auto "Adjust function" to have the TV set automatically adjust the video signals it receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. This function does not work in DVI-Digital mode.
  • Page 46 Changing the Screen Position Adjust the PC's screen positioning if it does not fit the TV screen. >- Preset: Press the SOURCE button to select PC mode. Press the MENU button to display the menu. Press the A or T button to select "Picture", then press the ENTER button.
  • Page 47: Setting The Clock

    Time Setting Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually Press the MENU button to display the menu.
  • Page 48 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER 1:_ button. Press the A or T button to select "Time", then press the ENTER _ button.
  • Page 49 Setting the Sleep Timer The sleep timer automatically shuts offthe TV after a preset time (30, 60, 90,120,150 and 180 minutes). Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER 1:_ button. Press the A or T button to select "Time", then press the ENTER _ button.
  • Page 50 Setting the On/Off Timer Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER [:_ button. Press the A or T button to select "Time", then press the ENTER C,-' button. Three different On/OffTimer Settings can be made.
  • Page 51: Selecting A Menu Language

    Function Description Selecting a Menu Language Press the MENU button to display the menu. Press the A or _' button to select "Setup", then press the ENTER Q_ button. Press the A or _' button to select "Language", then press the ENTER button.
  • Page 52 The "V-Chip" screen will appear. Press the A or 'V button to select "Change PIN", then press the ENTER button. The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the "Confirm new PIN."...
  • Page 53 How to Set up Restrictions Using the TV Parental Guidelines First, set up a personal identification number (PIN) and enable the V-Chip. (See previous section.) Parental restrictions be set up using either of two methods: The TV guidelines or the MPAA rating. Press the MENU button to display the menu.
  • Page 54 How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
  • Page 55 How to Set up Restrictions Using the Canadian English Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER [:_ button. Press the ,L or T button to select "V-Chip", then press the ENTER button.
  • Page 56 How to Set up Restrictions Using the Canadian French Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER _ button. Press the ,L or T button to select "V-Chip", then press the ENTER button.
  • Page 57 Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER [_ button. Press the A or T button to select "V-Chip", then press the ENTER [_ button.
  • Page 58: Viewing Closed Captions (on-screen Text Messages) -analog

    Viewing Closed Captions (On-Screen Text Messages) -Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) Press the MENU button to display the menu.
  • Page 59: Viewing Closed Captions (on-screen Text Messages) - Digital

    Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER I:_ button. Press the A or T button to select "Caption", then press the ENTER C,_ button.
  • Page 60: [] Adjusting The Tv On/off Melody Sound

    Adjusting the TV On/Off IVlelodySound A melody sound can be set to come on when the TV is powered On or Off. Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER _ button.
  • Page 61: Setting The Entertainment Mode

    Setting the Entertainment mode The "Entertainment" mode enables you to select the optimal display and sound for sports, cinema and games. Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER C:_ button. Press the A or T button to select "Entertainment", then press the ENTER G ,_ button.
  • Page 62: Upgrading The Software

    Upgrading the Software Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV.
  • Page 63: Using The Wiselink Function

    Compatibility problem. >- Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. >- Do not disconnect the USB device while it is loading.
  • Page 64: Using The Photo List

    Using the WISELINK Menu Press the MENU button. Press the A or T button to select "Application", then press the ENTER _ button. Press the A or T button to select "WISELINK", then press the ENTER button. >- The "WISELINK" menu is displayed.
  • Page 65 Screen Display Currently selected photo Shows the currently selected photo. Photo information Window Shows information about the currently selected photo. You can change the "Color", "Composition", and "Favorite". Current Sort Standard Press the A or T button to change the standard for sorting photos. ("Monthly", "Timeline", "Color", "Composition", "Folder", "Preference") The item that is selected as the sorting standing is highlighted in the Photo Information Window.
  • Page 66 Sorting Photo List You can sort photos in the Photo List by a particular standard. Press the W.LINK button on the remote control to display the "WISELINK" menu. Press the 4 or 1_ button to select "Photo", then press the ENTER 1:_ button.
  • Page 67 Color Sorts photos by color. >_ You can change the photo color information. Select "Color" as the sorting standard in the Photo List. Press the 4 or I_ button to select from the sublist of files grouped by color. >_ To move to the previous / next group, press the _ (REW) or (FF) button.
  • Page 68 Folder Sorts photos by folder. If there are many folders in USB, the photos files are shown in order in each folder. The photo file in the Root folder is shown first and the others are shown in alphabetical order by name. Select "Folder"...
  • Page 69 Deleting the Photo file Press the 4 or _ button to select the desired photo in the Photo list. Press the TOOLS button. Press the A or T button to select "Delete", then press the ENTER button. >_ The "Selected File(s) : Delete this file?"...
  • Page 70: Viewing A Photo Or Slide Show

    Viewing a Photo or Slide Show Viewing a Slide Show Press the W.LINK button on the remote control to display the "WISELINK" menu. Press the 4 or 1_ button to move to "Photo", then press the ENTER C *_ button. >_ Photo files are displayed.
  • Page 71 Viewing a photo Press the W.LINK button on the remote control to display the "WISELINK" menu. Press the 4 or _ button to move to "Photo", then press the ENTER button. >_ Photo files are displayed. Press the 4 or _ button to select the desired photo in the Photo list. Then Press the Yellow button to select only one file.
  • Page 72 Zoom You can zoom into images in full screen mode. Press the A or T button to select "Zoom", then press the ENTER _ button. Press the 4 or _ button repeatedly to increase or decrease the Zoom effect. (xl --> x2 --> x4) To move the enlarged photo image, press the ENTER _ button, then press the A/T/4/_...
  • Page 73 Background Music Setting You can set the background music. Press the A or T button to select "Background Music Setting", then press the ENTER C ,_ button. If you turn off the "Background Music", even if the "Background Music Settings" have been set up, the background music will not be played.
  • Page 74: Using The Music List

    Using the Music List This menu shows MP3 files from among the files saved on a USB memory device. Press the W.LINK button on the remote control to display the "WISELINK" menu. Press the 4 or _ button to select "Music", then press the ENTER 1:_ button.
  • Page 75 Item Selection Information Shows the number of music files that are selected by pressing the Yellow button. Help Items - Red(Device) button: Selects a connected device. , Green(Favorites Setting) button: Changes the favorites setting for the selected music. Press this button repeatedly until the desired value appears.
  • Page 76 Artist Sorts music files by the artist. >- It sorts the music file by artist in alphabetical order. Select "Artist" as the sorting standard in the Music List. Press the 4 or _ button to select from the sublist of files grouped in alphabetical order.
  • Page 77 Genre Sorts music files by the genre. Select "Genre" as the sorting standard in the Music List. Press the 4 or 1_ button to select from the sublist of files grouped by Genre. >- To move to the previous / next group, press the _ (REW) or (FF) button.
  • Page 78 Deleting the Music file Press the 4 or I_ button to select the desired music file in the music list. Press the TOOLS button. Press the A or T button to select "Delete", then press the ENTER button. >- The (for example) "Selected File(s) : Delete this file?"...
  • Page 79: Music File

    Playing a Music File Playing a music file Press the W.LINK button on the remote control to display the "WISELINK" menu. Press the 4 or 1_ button to select "Music", then press the ENTER E:_ button. >_ Music files are displayed. Pressing the 4 or I_ button to select a music file to be played, then press the ENTER I:_ button.
  • Page 80 Playing the selected music flies Press the W.LINK button on the remote control to display the WISELINK menu. Press the 4 or 1_ button to select "Music", then press the ENTER q_ button. Press the 4 or 1_ button to select the desired music file, then press the yellow button.
  • Page 81: Using The Setup Menu

    Using the Setup Menu Setup displays the user settings of the WISELINK menu. Press the W.LINK button on the remote control to display the WISELINK menu. Press the 4 or 1_ button to select "Setup", then press the ENTER C:_ button.
  • Page 82: What Is Anynet

    Connecting Anynet + Devices The Anynet + system can be used only with Samsung devices that have the Anynet + feature. To be sure your Samsung device has this feature, check if there is an Anynet + logo on it.
  • Page 83: Setting Up Anynet

    Setting Up Anynet+ The following settings help set the Anynet + functions. To use the Anynet+ Function, Anynet + (NDMI-CEC) must be set to On Press the MENU button. Press the A or T button to select "Application", then press the ENTER O# button. Press the A or T button to select "Anynet + (HDMI-CEC)", then press the ENTER C_ button.
  • Page 84: Recording

    >_ The [_:_J, _-] operations may differ depending on the device. Recording You can make a recording of a TV program using a Samsung recorder. Press the TOOLS button. Press the A or 'V' button to select Recording Immediately and press the ENTER C:_ button.
  • Page 85: Listening Through A Receiver (home Theater)

    Listening through a Receiver (Home theater) can listen to sound through a receiver instead of the TV speaker. Press the TOOLS button. Press the A or T button to select "Receiver". Press the 4 or _ button to select to "On". Now you can listen to sound through the receiver.
  • Page 86 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Problem Possible Solution Poor picture. Try another channel Adjust the antenna.
  • Page 87 Problem Image is not stable and may appear If the setting is not correct, use your computer utility program to change the to vibrate when you have a computer display settings. connected to the PC input. >- Your TV supports multiscan display functions within the following frequency domain: Horizontal frequency...
  • Page 88: [] Installing The Stand

    Install ng the Stand Attach your LCD TV to the stand. _- Two or more people should carry the TV. _- Make sure to distinguish between the front and back of the stand when attaching it. _- To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV.
  • Page 89: [] Auto Wall-mount Adjustment (sold Separately)

    Auto Wall-iVlount Adjustment (Sold separately) Once the auto wall mount is installed, your TV's position can be easily adjusted. Auto Wall=Mount TV Rear Panel EX-LINK Cable (Not supplied) Entering the menu Press the A, T, 4 or _ button on your remote control. >- The Wall Mount Adjustment screen is displayed.
  • Page 90: [] Wall Vlount Kit Specifications (vesa)

    Do not use screws that do not comply with the VESA standard screw specifications. Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
  • Page 91: Using The Anti-theft Kensington Lock

    Using the Anti-Theft Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use.
  • Page 92: Specifications

    Specifications PcResolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 10Wx2 10Wx2 10Wx2 Output ...... _r ........Dimensions (W×D×H) 31.5 X 3.5 X 20.2 inches 36.1 X 3.6 X 23.3 inches 39.2 X 3.6 X 24.7 inches (801.0 X 88.3 X 513.5 mm) (917.5 X 91.8 X 592.0 mm)
  • Page 93: Dimensions

    NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc.
  • Page 94 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc.
  • Page 95 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. (9 2008 Samsung Electronics America, Inc.
  • Page 96 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc.
  • Page 97 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc.
  • Page 98 The GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
  • Page 99 These requirementsapply to the modifiedwork as a whole. If identifiable sections of that work are not derived from the Program,and can be reasonably considered independentand separate works in themselves,then this License, and its terms, do not apply to those sectionswhen you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License,whose permissionsfor other licensees extend to the entire whole, and thus to each and every part regardlessof who wrote it.
  • Page 100 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
  • Page 101 GNU Lesser General Public License (LGPL) Version 2.t, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.
  • Page 102 TERMS AND CONDITIONS FOR COPYING, DISTRIBUTIONAND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License").
  • Page 103 5. A program that contains no derivative of any portion of the Library,but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
  • Page 104 10. Each time you redistribute the Library (or any work based on the Library),the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictionson the recipients' exercise of the rights granted herein.
  • Page 105 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change.
  • Page 106 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro...

Comments to this Manuals

Symbols: 0
Latest comments: