Table of Contents
Advertisement
Problem
Image is not stable and may appear
to vibrate when you have a computer
connected
to the PC input.
If the setting is not correct, use your computer utility program to change the
display settings.
>-
Your TV supports multiscan display functions within the following
frequency
domain:
Horizontal frequency
(kHz)
30-60
Vertical frequency
(Hz)
60-75
PC Maximum
refresh rate (at 60 Hz)
1920 x 1080
Adjust the horizontal
and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a
digital signal.
If "Just Scan" is selected with some external devices, the picture may appear
distorted in the corner of the screen. This symptom is caused by the external
devices, not TV.
Image is not centered on the screen,
The picture appears distorted in the
corner of the screen.
The "Resets all settings to the defau t
This appears when you press and hold the EXIT button for a while. The product
values." message appears,
settings are reset to the factory defaults.
This TFT LCD panel uses a panel consisting
of sub pixels (6 220 800) which require sophisticated
technology
to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance
of
the product.
Hide quick links:
Advertisement
Table of Contents
