Table of Contents
Advertisement
Anynet + Menu
The Anynet + menu changes depending
on the type and status of the Anynet + devices connected
to the TV.
View TV
Device List
Record
Menu on Device
Device Operation
Timer Recording
Stop Recording
Receiver
Setup
Switches from Anynet ÷ to TV broadcast
mode.
Displays the Anynet ÷ device list.
Starts a recording.
(This menu works only for a device supporting
recording.)
Shows the menu of the connected
device.
Example: When a DVD Recorder is connected,
the DVD Recorder's
title menu
appears.
Shows the play control menu of the connected
device.
Example: When a DVD Recorder is connected,
the play control menu of the DVD
Recorder appears.
Allows reserving a recording.
(This menu works only for a device supporting
recording reservations.)
Stops recording.
Sound is output through the receiver (home theater).
You can set the Anynet+ (HDMI-CEC),
auto turn off, and searching connections
for
using Anynet÷.
TV Remote
Control
Buttons
Available
in Anynet + Mode
Anynet + Device
After switching to the device, when the
menu of the corresponding
device is
displayed on the screen.
After switching to the device, while
Numeric
buttons
A/T/4/_/ENTER
C# buttons
Color buttons / EXIT button
[_2_](Backward
search) / I_(Forward
search)
playing
file
a
[_(Stop)
/ [_)(Play)
/ [_(Pause)
After switching to the device, when you
Device with built-in
Tuner
CN v/CN
^ button
are watching
a TV program
.....
Aud!Q,Dev!ce
>_ TheAnynet
+ function only works when the active source on the TV remote control is set to TV.
>-
The _
button works only while in the recordable
state.
>_ You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet ÷ devices only using the TV
remote control.
>_ The TV remote control may not work under certain conditions.
In this case, reselect the Anynet + device.
>-
The Anynet + functions do not operate with other manufacturers'
products.
>_ The [_:_J, _-]
operations
may differ depending
on the device.
Recording
You can make a recording of a TV program using a Samsung
recorder.
Press the TOOLS button.
In
2.
Press the A or 'V' button to select Recording
Immediately
and press the ENTER C:_
button. Recording
begins.
When there is more than one recording
device
When multiple recording devices are connected,
the recording devices are listed.
Press the A or T button to select a recording device and press the ENTER
button. Recording begins.
When the recording
device
is not displayed
Select "Device List" and press the red button to search devices.
Press the EXIT button to exit.
You can record the source streams by selecting "Record" after pressing the TOOLS button.
Pressing the _
button will record whatever you are currently watching.
If you are watching
video from another
device, the video from the device is recorded.
Before recording,
check whether the antenna jack is properly connected
to the recording device. To properly connect
an antenna to a recording device, refer to the recording device's users manual.
Hide quick links:
Advertisement
Table of Contents
