Using The Accessories - Eureka 6230 Series Owner's Manual

Using the Accessories

Simply remove the flexible hose and hose handle from the rear of the machine (Fig. A)
and add to it any of the tools which are stored in the back of the machine (Fig. B).
The dusting brush can be attached to any of the other tools as shown and can be used
to clean small areas of carpets such as stair treads and cushion covers etc. The crevice
nozzle is designed for cleaning in narrow difficult places. To reach high ceilings, curtains,
etc. assemble the extension tubes on the hose handle (Fig. C) and fit the attachment
required to the end marked (Fig. D).
The extension tube assembly consists of two tubes - with one located inside the other
for storage. Assemble only as shown. After using the flexible hose, always ensure that
the hose handle is pressed firmly into the socket to complete the air seal. Fit the flexible
hose over the carrying handle and replace the auxiliary tools in their correct locations.
(See Figs. E and F).
Fig. A Fig. B
Fig. D
Crevice
nozzle
Dusting
Fig. C
brush
Extension
tubes
2
2
1
1
Fig. E Fig. F
7