Using Your Cleaner; The Controls - Eureka 6230 Series Owner's Manual

1
3-speed Power Setting
Cleaner Height Setting
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts of
body away from any moving part (such as the revolving brush). Turn
off the switch and unplug the cleaner before changing the cleaner
height setting.
The front of the cleaner has an adjustment that
raises or lowers the cleaner base to match the
type of carpet. With the cleaner cord unplugged,
set the adjustment to lowest setting for
maximum cleaning. If the cleaner is difficult to
push, move adjustment to next highest setting
until cleaner is comfortable to push. The brush
roll must reach the carpet for effective cleaning.
6
Release the cord by turning down the top cord hook
and connect to your electrical outlet.
2 Tilt the cleaner towards you (1) and tap the pedal
with your foot (2). The brushes will automatically
come into contact with the floor. Switch on.
For cleaning under furniture continue the downward
movement of the handle and tap the pedal once
more to bring the brushes into contact with the floor.

The Controls

Move switch from off
position increasing
Off
power as you slide
Low
switch from low to
high. High provides
Med
the best cleaning
High
power and
separation.

Using Your Cleaner

dust
Filter indicator
Red neon indicator
comes on when the
washable HEPA filter
needs cleaning or
changing. See page
9 for instructions on
changing or cleaning.