Table of Contents
Advertisement
8
9
10 Locate this end
NOTE: Rotate brush roll to
11
Lift wheel carriage.
Wheel Carriage
IMPORTANT: This area must be hooked under
before tightening fasteners.
NOTE: After replacing base plate switch cleaner
on and check brush is rotating before
using again.
NOTE: Turn off the switch and unplug
the electrical cord before
changing light bulb.
1. Remove two screws from the top of lens.
Remove lens to access light bulb.
2. Pull out light bulb; push new bulb into
place. Use Genuine Bulb No. 57940-2.
3. Install headlight lens to proper position
on hood. Secure with the two screws.
User Maintenance
Push this end in first
Pull brush roll forward
centralize belt.
How To Replace Light Bulb
8
9
12
Screws
10
Replace base plate by
inserting tabs on
base plate into slots
on base of unit. Drop
wheel carriage back
into place.
13 Tighten fasteners
13
Advertisement
Table of Contents
