Important Safety Instructions - Epson Aculaser M1200 series User Manual

❏ Be careful not to scratch the surface of the drum. When you remove the photoconductor unit
from the printer, always place the unit on a clean, smooth surface. Avoid touching the drum,
since oils from your skin can permanently damage its surface and affect print quality.
❏ To get the best print quality, do not store the photoconductor unit in an area subject to direct
sunlight, dust, salt air, or corrosive gases (such as ammonia). Avoid locations subject to
extreme or rapid changes in temperature or humidity.
❏ Wait for at least one hour before using a developer cartridge or a photoconductor unit after
moving it from a cool to a warm environment to prevent damage from condensation.
❏ Do not dispose of developer cartridges or photoconductor units in fire, as they can explode
and cause injury. Dispose of them according to local regulations.
❏ Be sure to keep consumable components out of the reach of children.
❏ Do not leave jammed paper inside the printer. This can cause the printer to overheat.
❏ Avoid using electrical outlets that other appliances are plugged into.
❏ Use only an outlet that meets the power requirements of this printer.

Important Safety Instructions

❏ Follow all warnings and instructions marked on the printer.
❏ Unplug the printer from the wall outlet before cleaning.
❏ Use a well-wrung cloth for cleaning and do not use liquid or aerosol cleaners.
❏ Do not use this printer in a damp environment.
❏ Avoid locations that are subject to direct sunlight, excessive heat, moisture, oil vapor, or dust.
❏ Place the printer near an electrical outlet where you can easily plug in and unplug the power cord.
❏ Do not place the printer on an unstable surface.
❏ Do not put your printer where the cord will be stepped on.
❏ Slots and openings in the cabinet and the back or bottom are provided for ventilation. Do not
block or cover them. Do not put the printer on a bed, sofa, rug, or other similar surface, or in a
built-in installation unless proper ventilation is provided.
❏ Keep the entire computer and printer system away from potential sources of interference, such
as loudspeakers or the base units of cordless telephones.
EPSON AcuLaser M1200 Series
Safety Instructions
User's Guide
11