Epson Aculaser M1200 series User Manual page 91

Output Paper Jam
Control panel: Ready and Error lights on
Indicates that there may be a paper jam inside the printer. Open the printer's output cover, remove
any jammed paper, and close the cover. The error will automatically clear itself and the jammed
page's print data is reprinted.
Paper Jam
Control panel: Ready and Error lights on
Indicates that there may be a paper jam inside the printer. Open the printer's front cover, remove
any jammed paper, and close the cover. The error will automatically clear itself and the jammed
page's print data is reprinted.
Paper Out/Feed Jam
Control panel: Ready and Error lights on
Indicates that there is either no paper loaded in the printer, or there is a paper jam in the feed slot.
If no paper is loaded, load paper into the MP tray, then open and close the printer's front cover.
See "Loading Paper " on page 22 for instructions on loading paper.
You can clear the error by pressing Continue on the EPSON Status Monitor 3 window that appears.
If paper is loaded, then there is a paper jam in the feed slot. See "Clearing Jammed Paper" on page
97 for instructions on clearing paper jams. The error is automatically resolved upon clearing the
jammed paper and opening and closing the printer's front cover.
No Developer Cartridge Installed
Control panel: Ready and Error lights on
Either the developer cartridge is not installed or is installed incorrectly. Check to see if the
developer cartridge is properly installed and follow the instructions under "Developer Cartridge"
on page 69 to install or reinstall it.
Wrong Developer Cartridge Installed
Control panel: Ready and Error lights on
EPSON AcuLaser M1200 Series
Troubleshooting
User's Guide
91