6. If you select Text, type the watermark text in the Text box. If you select BMP, click Browse,
and select the BMP file you want to use, then click OK.
Note:
Before making a custom watermark, you should prepare a bitmap (.bmp) file.
7. Click Save to close the User Defined Watermarks dialog box. Your watermark will appear in
the list box.
8. Click OK to register the new watermark settings.
Note:
You can register up to 10 watermarks.
Resetting the photoconductor counter
After replacing a photoconductor unit, reset the photoconductor counter by using the printer
driver. When you are finished installing a new a photoconductor unit, see "Resetting the
photoconductor counter" on page 36.
Resetting the photoconductor counter
1. Click the Optional Settings tab, and then click Printer Settings. The Printer Settings dialog
box appears.
2. Click Reset OPC Level. The photoconductor clear dialog box appears.
AcuLaser M1200/EPL-6200L
3. Click OK to reset the OPC level counter.
EPSON AcuLaser M1200 Series
Using the Printer Driver For Windows
User's Guide
36