Status Alert Window - Epson Aculaser M1200 series User Manual

5
Do not display this
window automatically
check box
More Settings (AcuLaser M1200/EPL-6200L)
You can monitor over routers or use the SMB protocol for communication to monitor Windows
shared printers.
1 Use SMB for communication
2 Monitor over routers

Status Alert window

The Status Alert window appears automatically when an error occurs. It indicates what type of
error has occurred and offers you a possible solution. It closes automatically once the problem is
cleared.
The Status Alert window opens when an error has occurred. The window does not open when the
error is set to do not notify in the Monitoring Preferences dialog box.
AcuLaser M1200/EPL-6200L
When this check box is selected, the Order Online window appears
automatically only when a replacement part first becomes low or reaches
end of service life.
You can monitor using both Winsock1.1 and SMB if you select the Use
SMB for communication check box. If you do not select it, you can
monitor only using Winsock1.1.
You can monitor Windows shared printers over routers.
EPSON AcuLaser M1200 Series
Using the Printer Driver For Windows
User's Guide
42