Led Board - HP Compaq nw9440 - Mobile Workstation Maintenance And Service Manual

Removal and Replacement Procedures

5.16 LED Board

LED Board Spare Part Number Information
LED board (includes LED board cable)
1. Prepare the computer for disassembly
2. Remove the switch cover
3. Remove the four Torx8 T8M2.5×4.0 screws 1 and the
Torx8 T8M2.5×19.0 screw 2 that secure the LED board to
the computer.
4. Lift up on the LED board 3 between the volume decrease
and volume increase buttons to disconnect the LED board
from the system board.
5. Remove the LED board.
Removing the LED Board
Reverse the above procedure to install the LED board.
5–34
(Section
(Section 5.15).
Maintenance and Service Guide
409957-001
5.3).