HP Compaq nw9440 - Mobile Workstation Maintenance And Service Manual page 123

7. Release the zero insertion force (ZIF) connector 1 to which
the keyboard cable is attached and disconnect the keyboard
cable 2.
✎
Step 8 applies only to computer models equipped with a
pointing stick.
8. Release the ZIF connector 3 to which the pointing stick
cable is attached and disconnect the pointing stick cable 4.
9. Remove the keyboard.
Disconnecting the Keyboard and Pointing Stick Cables
Reverse the above procedure to install the keyboard.
Maintenance and Service Guide
Removal and Replacement Procedures
5–23