Table of Contents
Advertisement
Back to Contents Page
Coin-Cell Battery
Alienware® M11x Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Coin-Cell Battery
1. Follow the instructions in
Before You
2. Remove the base cover (see
3. Remove the battery pack (see
4. Remove the hinge cover (see
5. Remove the keyboard (see
6. Remove the palm rest assembly (see
7. Disconnect the coin-cell battery cable from the connector on the system board.
8. The coin-cell battery is glued to the system board. Using a plastic scribe pry the coin-cell battery from the system board.
1
coin-cell battery cable connector
Replacing the Coin-Cell Battery
1. Follow the instructions in
Before You
2. Use the adhesive on the coin-cell battery and adhere it to the system board.
3. Connect the coin-cell battery cable to the connector on the system board.
Begin.
Removing the Base
Cover).
Removing the Battery
Pack).
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Palm Rest
2
coin-cell battery
Begin.
Removing the Battery
Assembly).
Pack) before working inside the
Advertisement
Table of Contents
