Table of Contents
Advertisement
1
display cable connector
12. Gently slide the antenna cables out through the slot on the computer base.
1
antenna cables
13. Lift the display assembly off the computer.
Replacing the Display Assembly
1. Follow the instructions in
Before You
2. Slide the antenna cables in through the slot on the computer base.
3. Place the display assembly in position and replace the four screws that secure the display assembly to the computer base.
4. Connect the display cable to the connector on the system board.
5. Turn the computer over and route the Mini-Card antenna cables through the routing guides on the computer base.
6. Connect the antenna cables to the Mini-Card(s).
7. Replace the palm rest assembly (see
8. Replace the keyboard (see
9. Replace the hinge cover (see
10. Replace the battery pack (see
11. Replace the base cover (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
2
screws (4)
Begin.
Replacing the Palm Rest
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing the Battery
Pack).
Replacing the Base
Cover).
Assembly).
Advertisement
Table of Contents
